FortiAP
Fortinet FortiAP-U234F
This enterprise class Wi-Fi 6 ruggedized indoor/outdoor AP provides three radios with internal antennas as well as features such as OFDMA and dual 1 Gbps Ethernet ports.
SKU: FORTIAP U234F
Key Features
- 802.11ax | Tri-Radio 5 GHz + 5 GHz + 2.4 GHz or 5 GHz + 2.4 GHz + scanning | 5 Antennas
- 2x2 MIMO | Up to 1,201 Mbps + 1,201 Mbps + 574 Mbps
Technical Specifications
| Specification | Value |
|---|---|
| Hardware Type | Outdoor AP |
| Number of Radios | 3 + 1 BLE |
| Number of Antennas | 2 Wi-Fi 5.0GHz band + 4 dual band Wi-Fi + 1 Single band 2.4GHz BLE/ZigBee |
| Antenna Type and Peak Antenna Gain | Directional patch Antenna |
| Frequency Bands (GHz) * | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
| Radio 1 | 2.4 GHz a/b/g/n (2x2 2stream) (64 QAM) or 5.0 GHz (high band) a/b/g/n/ac/ax (2x2 2 stream) 20/40/80/160 MHz (64/256/1024 QAM) |
| Radio 2 | 5.0 GHz a/n/ac/ax (2x2 2 stream) 20/40/80/160 MHz (64/256/1024 QAM |
| Radio 3 | 2.4/5.0 GHz dual band b/g/n/ac (2x2 2 stream) 20/40 MHz (64 QAM) |
| Maximum Data Rate | Radio 1 up to 2,402 Mbps Radio 2 up to 2,402 Mbps Radio 3 up to 300 Mbps |
| Bluetooth Low Energy Radio | Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power |
| Interfaces | 1x 100/1000/2500 Base-T RJ45(802.2bt/at PoE) 1 x 10/100/1000 Base-T RJ45 (802.3af PoE PSE), 1x RS-232 RJ45 Serial Port |
| Power over Ethernet (PoE) | 802.3bt PoE ships with PoE injector (reset functionality) |
| Simultaneous SSIDs | Up to 16 (14 if background scanning enabled) |
| EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAPMSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication | WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist |
| Maximum Tx Power | Radio 1 2.4GHz 25 dBm / 316 mW (2 chains combined)* 5GHz 25 dBm / 316 mW (2 chains combined)* Radio 2 5GHz 25 dBm / 316 mW (2 chains combined)* Radio 3 2.4GHz 27 dBm / 501 mW (2 chains combined)* 5GHz 25 dBm / 316 mW (2 chains combined)* |
| Kensington Lock | No |
| IEEE Standards | 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w, 802.11ac, 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.11ax, 802.3bz |
| SSID Types Supported | Local-Bridge, Mesh, and Tunnel |
| Per Radio Client Capacity | Up to 512 clients per Radio1 and Radio2 |
| Cellular Co-existence | Yes |
| LED Off Mode | No |
| Advanced 802.11 Features | Yes |
| OFDMA | Yes (UL and DL) |
| Spatial Reuse (BSS Coloring) | Yes |
| UL MU-MIMO | Yes |
| DL MU-MIMO | Yes |
| Enhanced Target Wake Time (TWT) | Yes |
| ZeroWait DFS /Agile DFS | Yes |
| Rogue Scan radio modes | Background and Dedicated |
| WIPS / WIDS radio modes | Background and Dedicated (recommended) |
| Packet Sniffer Mode | Yes |
| Spectrum Analyzer | Yes |
| Length x Width x Height (inches) | 12.45 x 8.59 x 1.66 inches (316.18 x 218.16 x 42.21 mm) |
| Weight | 2.66 lbs (1.207 kg) |
| Package (shipping) Weight | 5.86 lbs (3.6 kg) |
| Mounting Options | Wall/ Pole |
| Included Accessories | 1-2. Wall/ Pole bracket 3. POE adapter - PIN060-54PR 4. Power cable 5. Grounding cable 6. Mounting Kit (Pole straps; mounting bolts, screws; grounding screws) |
| Power Supply | 802.3bt/at (ships with passive PoE injector with build in reset switch) |
| Power Consumption (Maximum) | 21 W |
| Humidity | 10–90% non condensing |
| Operating / Storage Temperature | 22–140°F (-40 - 60°C) / -40–176°F (-40–80°C) |
| Directives | Low Voltage Directive • RoHS |
| UL2043 Plenum Material | No |
| Mean Time Between Failures | >10 Years |
| Surge Protection Built In | Yes |
| IP Rating | IP67 |
| Hit-less PoE Failover | N/A |
| Wi-Fi Alliance Certified | No |
| DFS | FCC, IC, CE, Taiwan |
| Limited Lifetime Warranty | Yes |
Interested in Fortinet FortiAP-U234F?
Layer7 Networks is an authorised Fortinet partner. Get expert advice and competitive pricing.
Request a Quote DatasheetPricing Notes: Pricing and product availability subject to change without notice E&OE.