FortiAP
Fortinet FortiAP U231F Wireless Access Point
The FortiAP U231F is a medium-density 802.11ac Wave 2 access points.
SKU: FORTIAP U231F
Technical Specifications
| Specification | Value |
|---|---|
| Hardware Type | Indoor AP |
| Number of Radios | 3 + 1 BT/BLE |
| Number of Antennas | 4 Dual band WiFI + 2 WiFi+Dual band Scanning + 1 Single band 2.4GHz BLE/ZigBee |
| Antenna Type and Peak Gain | PIFA antenna Dual band: 3.97 dBi for 2.4GHz and 5.89 dBi for 5GHz Single band 5Ghz antenna 5dBi for 2.4GHz band BLE antenna 3.5dBi at 2.4GHz band |
| Radio 1 Capabilities | Band: 2.4 GHz or 5.0 GHz(High Band) a/b/g/n/ac/ax (2x2:2 stream) Channel width: 20/40/80MHz Modulation: BPSK, QPSK, 64/256/1024 QAM |
| Radio 2 Capabilities | 5.0 GHz a/b/g/n/ac/ax (2x2:2 stream) Channel width: 20/40/80MHz Modulation: BPSK, QPSK, 64/256/1024QAM |
| Maximum Data Rate | Radio 1: up to 1201 Mbps Radio 2: up to 1201 Mbps Radio 3: up to 574 Mbps |
| Bluetooth Low Energy (BT/BLE) Radio | Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power |
| Interfaces | 2x 10/100/1000 Base-T RJ45, 1x Type 2.0 USB, 1x RS-232 RJ45 Serial Port |
| Power over Ethernet (PoE) | 1 x 802.3at PoE default 1 x 802.af PoE with reduce TX power and no USB function |
| Simultaneous SSIDs | Up to 24 (21 if background scanning enabled) |
| EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication | WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist & allowlist |
| Maximum Tx Power | Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains combined) 5GHz: 22 dBm / 158 mW (2 chains combined) Radio 2: 5GHz: 22 dBm / 158 mW (2 chains combined) Radio 3: 2.4GHz: 23 dBm / 200 mW (2 chains combined) 5GHz: 22 dBm / 158 mW (2 chains combined) |
| Kensington Lock | Yes |
| IEEE Standards | 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az |
| SSID Types Supported | Local-Bridge, Tunnel, and Mesh |
| Per Radio Client Capacity | Up to 512 clients per radio (all radios) |
| Cellular Co-existence | Yes |
| Reset Button | Yes |
| LED Off Mode | Yes |
| Transmit Beam Forming (TxBF) | Yes |
| Low-Density Parity Check (LDPC) Encoding | Yes |
| Maximum Likelihood Demodulation (MLD) | Yes |
| Maximum Ratio Combining (MRC) | Yes |
| A-MPDU and A-MSDU Packet Aggregation | Yes |
| OFMDA | Yes |
| 2.4 GHz OFDMA | Yes |
| Spatial Reuse (BSS Coloring) | Yes |
| HE-MU-MIMO | Yes |
| UL MU-MIMO 802.11ax mode | Yes |
| UL MU-MIMO 802.11ac mode | Yes |
| DL-MU-MIMO | Yes |
| Enhanced Target Wake Time (TWT) | Yes |
| ZeroWait DFS /Agile DFS | Yes |
| Rogue Scan Radio Modes | Background, Dedicated |
| WIPS / WIDS Radio Modes | Background, Dedicated (recommended) |
| Packet Sniffer Mode | Yes |
| Spectrum Analyzer | Yes |
| Length x Width x Height | 6.5 x 6.5 x 2.05 inches (165 x 165 x 52 mm) |
| Weight | 1.5 lbs (0.68 kg) |
| Package (shipping) Weight | 2.6 lbs (1.185 kg) |
| Mounting Options | Ceiling, T-Rail and Wall |
| Included Accessories | Standard Mount kit for Ceiling, T-Rail and Wall |
| Power Supply | SP-FAP200-PA-XX |
| Power Consumption (Maximum) | 18.5 W |
| Humidity | 5 - 90% non condensing |
| Operating / Storage Temperature | 32–122°F (0 - 50°C) / -22–158°F (-30–70°C) |
| Directives | Low Voltage Directive • RoHS |
| UL2043 Plenum Material | Yes |
| Mean Time Between Failures | >10 Years |
| IP Rating | N/A |
| Surge Protection Built In | -- |
| Hit-less PoE Failover | N/A |
| Wi-Fi Alliance Certified | No |
| DFS | No |
| Limited Lifetime Warranty | Yes |
Interested in Fortinet FortiAP U231F Wireless Access Point?
Layer7 Networks is an authorised Fortinet partner. Get expert advice and competitive pricing.
Request a Quote DatasheetPricing Notes: Pricing and product availability subject to change without notice E&OE.