FortiAP
Fortinet FortiAP U433F
The Fortinet Universal U433F offer the ability to support all deployment options from on-premise to cloud management.
SKU: FORTIAP U433F
Caractéristiques clés
- Tri-Radio 5 GHz + 5 GHz + 2.4 GHz or 5 GHz + 2.4 GHz + scanning
- 10 Antennas
- Up to 4,804 Mbps + 4,804 Mbps + 300 Mbps
Spécifications techniques
| Specification | Value |
|---|---|
| Type de matériel | Indoor AP |
| Nombre de radios | 3 + 1 BT/BLE |
| Nombre d’antennes | 10 Internal + 1 BT/BLE Internal |
| Antenna Type and Peak Gain | PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
| Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
| Radio 1 Capabilities | 5.0 GHz a/n/ac/ax (4x4:4 stream) 20/40/80/160 MHz (64 QAM and 1024 QAM) |
| Radio 2 Capabilities | 2.4 GHz or 5.0 GHz (high band) a/b/g/n/ac/ax (4x4:4 stream) 20/40/80/160 MHz (64 QAM and 1024 QAM) |
| Débit de données maximal | Radio 1: up to 4,804 Mbps Radio 2: up to 4,804 Mbps Radio 3: up to 300 Mbps |
| Bluetooth Low Energy (BT/BLE) Radio | Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
| Interfaces | 1x 10/100/1000/2500 Base-T RJ45, 1x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port |
| Power over Ethernet (PoE) | Dual redundant PoE power ports with support for IEEE 802.3at (2x2 @ 17 dBm with 802.3af; USB disabled) |
| SSID simultanés | Up to 16 (14 if background scanning enabled) |
| Type(s) EAP | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST |
| Authentification utilisateur/appareil | WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
| Puissance d’émission maximale | Radio 1: 5 GHz: 24 dBm / 251 mW (4 chains combined)* Radio 2: 2.4 GHz: 26 dBm / 398 mW (4 chains combined)* 5 GHz: 24 dBm / 251 mW (4 chains combined)* Radio 3: 2.4 GHz: 22 dBm / 158 mW (2 chains combined)* |
| Verrou Kensington | Yes |
| IEEE Standards | 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az |
| Types de SSID pris en charge | Local-Bridge, Mesh, & Tunnel |
| Per Radio Client Capacity | Up to 512 |
| Cellular Co-existence** | Yes |
| LED Off Mode | Yes |
| 802.11ac MU-MIMO Wave 2 | Yes |
| Transmit Beam Forming (TxBF) | Yes |
| Low-Density Parity Check (LDPC) Encoding | Yes |
| Maximum Likelihood Demodulation (MLD) | Yes |
| Maximum Ratio Combining (MRC) | Yes |
| A-MPDU and A-MSDU Packet Aggregation | Yes |
| MIMO Power Save | Yes |
| Short Guard Interval | Yes |
| OFMDA | Yes |
| Rogue Scan Radio Modes | Background, Dedicated |
| WIPS / WIDS Radio Modes | Background, Dedicated (recommended) |
| Packet Sniffer Mode | Yes |
| Spectrum Analyzer | Yes |
| Longueur x Largeur x Hauteur | 8.46 x 8.46 x 2.26 inches (215 x 215 x 57.5 mm) |
| Weight | 1.0 lb (0.453 kg) |
| Poids du colis (expédition) | 1.8 lbs (0.82 kg) |
| Options de montage | Ceiling, T-Rail and Wall |
| Accessoires inclus | Mount kits for Ceiling, T-Rail, and Wall |
| Alimentation | SP-FAP200-PA-XX, or GPI-130 |
| Consommation électrique (maximale) | 24.5 W |
| Humidity | 10–90% Non-Condensed 5–90% Condensed |
| Operating / Storage Temperature | 32–122°F (0–50°C) / -31–158°F (-35–70°C) |
| Directives | Low Voltage Directive • RoHS |
| UL2043 Plenum Material | Yes |
| Temps moyen entre pannes | >30 Years |
| IP Rating | — |
| Surge Protection Built In | — |
| Hit-less PoE Failover | Yes (802.3at only) |
| Wi-Fi Alliance Certified | No |
| DFS | — |
| Garantie à vie limitée | Yes |
Interested in Fortinet FortiAP U433F?
Layer7 Networks est un partenaire Fortinet agréé. Bénéficiez de conseils d’experts et de tarifs compétitifs.
Demander un devis DatasheetNotes tarifaires : Les prix et la disponibilité des produits peuvent changer sans préavis. Sauf erreur ou omission.