FortiAP
Fortinet FortiAP U231G Wireless Access Point
The FortiAP-U231G is a small plug and play wireless access point suitable for travel or remote access.
SKU: FAP-U231G
Spécifications techniques
| Specification | Value |
|---|---|
| Type de matériel | Indoor AP |
| Nombre de radios | 3 + 1 BLE |
| Nombre d’antennes | Internal x2 Dual band Wi-Fi + x2 Tri-band Wi-Fi & Scanning + 1 Single band 2.4GHz BLE/ ZigBee |
| Antenna Type and Peak Gain | PIFA antenna. Dual band: 4.5 dBi for 2.4GHz, 5.5 dBi for 5 GHz Tr-band: 4.5 dBi for 2.4GHz, 5.5 dBi for 5 GHz & 5.5dBi for 6GHz band BLE antenna: 4.0dBi for 2.4Ghz |
| Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850, 5.925–6.425, 6.425–6.525, 6.525–7, 5.925–6.875, 6.875–7.125 |
| Radio 1 Capabilities | Frequency band: 2.4GHz Channel width: 20/40MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service |
| Radio 2 Capabilities | Frequency band: 5.0GHz Channel width: 20/40/80/80+80MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service |
| Radio 3 Capabilities | Frequency bands: 6.0GHz Channel width: 20/40/80/160MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service and scanning |
| Débit de données maximal | Radio 1: up to 574 Mbps Radio 2: up to 1201 Mbps Radio 3: : Up to 2401 Mbps |
| Bluetooth Low Energy Radio | Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power |
| Interfaces | 1 100/1000/2500 Base-T RJ45, 1 10/100/1000 Base-T RJ45, 1x Type 3.0 USB, 1 RS-232 RJ45 Serial Portt |
| Power over Ethernet (PoE) | 1 x 802.3at PoE default |
| SSID simultanés | Up to 24 |
| Type(s) EAP | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
| Authentification utilisateur/appareil | WPA™, WPA2™, and WPA3™ with 802.1x or preshared key, WEP, Web Captive Portal, MAC blocklist & allowlist |
| Maximum Tx Power (Conducted) | Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains combined) Radio 2: 23 dBm / 158 mW (2 chains combined) Radio 3: 6GHz: 21 dBm 80 mW (2 chains combined @ 160MHz BW) |
| Verrou Kensington | Yes |
| IEEE Standards | 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az |
| Types de SSID pris en charge | Local-Bridge, Tunnel, and Mesh |
| Per Radio Client Capacity | Up to 512 clients per radio (Radio1, Radio2 and Radio3) |
| Cellular Co-existence | Yes |
| LED Off Mode | Yes |
| OFDMA | Yes |
| Spatial Reuse (BSS Coloring) | Yes |
| UL MU-MIMO | Yes |
| DL-MU-MIMO | Yes |
| Enhanced Target Wake Time (TWT) | Yes |
| ZeroWait DFS | No |
| Rogue Scan radio modes | Background, Dedicated |
| WIPS / WIDS radio modes | Background, Dedicated (recommended) |
| Packet Sniffer Mode | Yes |
| Spectrum Analyzer | Yes |
| Longueur x Largeur x Hauteur | 7.18 x 7.18 x 2.12 inches (182.4 x 182.4 x 54.0 mm) |
| Weight | 1.75 lbs (0.8 kg) |
| Options de montage | Ceiling, T-Rail, and Wall |
| Accessoires inclus | Standard Mount kit for Ceiling, T-Rail, and Wall |
| Alimentation | SP-FAP400-PA-XX or 802.3at PoE (GPI-130) |
| Consommation électrique (maximale) | Depends on PoE connected |
| Humidity | 5 - 90% non condensing |
| Operating / Storage Temperature | 32°–122°F (0° - 50°C) / -22°–158°F (-30°–70°C) |
| Directives | Low Voltage Directive • RoHS |
| UL2043 Plenum Material | Yes |
| Temps moyen entre pannes | > 10 Years |
| IP Rating | N/A |
| Surge Protection Built In | Yes |
| Hit-less PoE Failover | N/A |
| Certifié WiFi Alliance | Yes |
| DFS | CE |
| Garantie à vie limitée | Yes |
Interested in Fortinet FortiAP U231G Wireless Access Point?
Layer7 Networks est un partenaire Fortinet agréé. Bénéficiez de conseils d’experts et de tarifs compétitifs.
Demander un devis DatasheetNotes tarifaires : Les prix et la disponibilité des produits peuvent changer sans préavis. Sauf erreur ou omission.