FortiAP
Fortinet FortiAP 23JF Wireless Access Point
The FortiAP 23JF is a medium-density 802.11ac Wave 2 access points.
SKU: FORTIAP 23JF
Spécifications techniques
| Specification | Value |
|---|---|
| Type de matériel | Indoor walljack/desktop AP |
| Nombre de radios | 3 + 1 BLE |
| Nombre d’antennes | 4 single band WiFi + 1 dual band scanning + 1 single band 2.4 GHz BLE/ZigBee |
| Antenna Type and Peak Gain | PCB antenna Dual band: 4.0 dBi in 2.4 GHz band and 4.0 dBi in 5 GHz band BLE antenna: 3.5 dBi in 2.4 GHz band |
| Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
| Radio 1 Capabilities | Frequency band: 2.4GHz Channel width: 20/40MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service |
| Radio 2 Capabilities | Frequency band: 5.0GHz Channel width: 20/40/80MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service |
| Radio 3 Capabilities | Frequency bands: 2.4GHz and 5.0GHz MIMO Chains: 1x1 Frequency Scanning |
| Débit de données maximal | Radio 1: up to 574 Mbps Radio 2: up to 1200 Mbps Radio 3: Frequency scanning only |
| Bluetooth Low Energy Radio | Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power |
| Interfaces | 7x 10/100/1000 Base-T RJ45 Ports (1x 802.3at PoE (PD), 1x 802.3af PoE (PSE), 2x Non-PoE Ports, 1x Pass-through in, 1x Pass-through out, 1x RS-232 RJ45 Serial Port |
| Power over Ethernet (PoE) | 1 x 802.3at PoE default Operational modes: powered by 802.af PoE - Only Radio functionality ; powered by 802.3at - All radio+ PSE (7W); Powered by DC power adaptor - All radio's + USB + PSE ( 802.3af) |
| SSID simultanés | Up to 16 (14 if background scanning enabled) |
| Type(s) EAP | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
| Authentification utilisateur/appareil | WPA™, WPA2™, and WPA3™ with 802.1x or preshared key, WEP, Web Captive Portal, MAC blocklist & allowlist |
| Maximum Tx Power (Conducted) | Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains combined) Radio 2: 5GHz: 22 dBm / 158 mW (2 chains combined) Radio 3: NA |
| Verrou Kensington | Yes |
| IEEE Standards | 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz |
| Types de SSID pris en charge | Local-Bridge, Tunnel, and Mesh |
| Per Radio Client Capacity | Up to 512 clients per radio (Radio1 and Radio2) |
| Cellular Co-existence | Yes |
| LED Off Mode | Yes |
| OFDMA | Yes |
| Spatial Reuse (BSS Coloring) | Yes |
| UL MU-MIMO 802.11ax mode | Yes |
| DL-MU-MIMO | Yes |
| Enhanced Target Wake Time (TWT) | Yes |
| ZeroWait DFS/Agile DFS | No |
| Rogue Scan radio modes | Background, Dedicated |
| WIPS / WIDS radio modes | Background, Dedicated (recommended) |
| Packet Sniffer Mode | Yes |
| Spectrum Analyzer | Yes |
| Longueur x Largeur x Hauteur | 6.6 x 4.6 x 1.1 inches (168 x 117 x 28 mm) |
| Weight | 0.99 lbs (0.45 kg) |
| Poids du colis (expédition) | 1.54 lbs (0.7 kg) |
| Options de montage | Wall Plate, Optional Desk Mount FAP-MNT-WJ-20 |
| Accessoires inclus | Standard Mount kit for Ceiling, T-Rail, and Wall |
| Alimentation | 802.3at PoE: GPI-130 Optional DC power adaptor SP-FAP23J-PAX-10 |
| Consommation électrique (maximale) | 17W |
| PSE functionality | Yes |
| Humidity | 10 - 90% non condensing |
| Operating / Storage Temperature | 32–122°F (0 - 50°C) / -22–158°F (-30–70°C) |
| Directives | Low Voltage Directive • RoHS |
| UL2043 Plenum Material | No |
| Temps moyen entre pannes | > 10 Years |
| IP Rating | N/A |
| Surge Protection Built In | Yes |
| Hit-less PoE Failover | N/A |
| Certifié WiFi Alliance | No |
| DFS | No |
| Garantie à vie limitée | Yes |
Interested in Fortinet FortiAP 23JF Wireless Access Point?
Layer7 Networks est un partenaire Fortinet agréé. Bénéficiez de conseils d’experts et de tarifs compétitifs.
Demander un devis DatasheetNotes tarifaires : Les prix et la disponibilité des produits peuvent changer sans préavis. Sauf erreur ou omission.